BLDQR - SYNTHETIC RUBBER ADHESIVE, LA-132
- MSDS: BLDQR
- Manufacturer: TACC INTERNATIONAL CORP
- Product Name: SYNTHETIC RUBBER ADHESIVE, LA-132
- National Stock Number: 8040-00N018976
Product Identification
Product ID:SYNTHETIC RUBBER ADHESIVE, LA-132
MSDS Date:07/01/1989
FSC:8040
NIIN:00N018976
MSDS Number: BLDQR
Responsible Party
ROCKLAND, MA 02370
US
Emergency Phone: 617-878-7015
Info Phone: 617-878-7015
Cage: OHZV1
Contractor
Telephone: 617-878-7015
Cage: 59888
Ingredients
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 45-50%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ETHYL ACETATE (SARA III)
CAS: 141-78-6
RTECS: AH5425000
Fraction By Weight: 20-25%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 7-10%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:IRRITATION. SKIN:REMOVAL OF
SKIN OILS, IRRITATION, DERMATITIS, EVEN SENSITIZATION W/LONG
OVEREXPOS. INGEST: MAY BE HARMFUL OR FATAL IF SWALLOWED.
CHRONIC:EFTS OF OVEREXPOS TO SOLV VAPS COUL D LEAD TO PERM EFTS TO
NERVOUS SYS, BODY ORGANS OR BRAIN. USE W/ ADEQUATE VENTILATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEADACHE, DIZZINESS, NAUSEA, UPPER RESPIRATORY
DRYNESS OR IRRITATION, DROWSINESS, MENTAL DEPRESSION OR NARCOSIS,
DIFFICULTY IN BREATHING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:GET FRESH AIR. EYES:FLUSH W/WATER FOR AT LEAST 15
MINUTES, IF NECESSARY CALL MD. SKIN:WASH W/SOAP & WATER. APPLY MILD
SKIN CREAM. INGEST:CALL POISON CENTER IMMEDIATELY.
Fire Fighting
Flash Point Method:CC
Flash Point:21.0F,-6.1C
Lower Limits:1.8%
Upper Limits:11.0%
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE, WATER SPRAY OR
FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROTECTIVE
EQUIPMENT . AVOID BRTHG SMOKE. WATER TENDS TO SPREAD BURNING LIQUID
IF LARGE AMOUNTS USED.
Unusual Fire/Explosion Hazard:EXTREMELY FLAMM. VAP MAY IGNITE EXPLO
&/OR CAUSE FLASH FIRES. ELIM SOURCES OF IGNIT. NO SMOKING. USE ADEQ
CROSS VENT SUFFICIENT TO REMOVE ODOR OF (SUPP DATA)
Accidental Release
Spill Release Procedures:SMALL QUANTITIES MAY BE ABSORBED INTO AN
APPROPRIATE ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
STORE AT 60-95F OUT OF SUN. USE ADEQUATE VENTILATION TO AVOID
BREATHING VAPOR WHEN COVER REMOVED.
Other Precautions:GROUND ALL EQUIPMENT WHEN HANDLING FLAMMABLE SOLVENT
BORNE MATERIALS.
Exposure Controls
Respiratory Protection:IF VAPORS EXCEED TLV, USE NIOSH/MSHA APPROVED
CONTAINED ORGANIC MASK.
Ventilation:LOCAL EXHAUST SUFFICIENT TO KEEP WORKROOM CONCENTRATION
BELOW TLV.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES, (SUPP DATA)
Other Protective Equipment:BARRIER CREAM FOR SENSITIVE SKIN.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:SOLVENT & VAPORS. ELECTRICALLY GROUND ALL CONTAINERS DURING
TRANSFER. EYE PROT:MAY ADD FULL LENGTH FACESHIELD TO GOGGLES .
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:171F,77C
Vapor Pres:71.9
Vapor Density:>1
Spec Gravity:0.892
Evaporation Rate & Reference:>1 (BUTYL ACETATE=1).
Solubility in Water:NIL
Appearance and Odor:CLEAR, KETONE ODOR.
Percent Volatiles by Volume:80
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS AND BASES.
Stability Condition to Avoid:FIRE, SPARKS, STATIC ELECTRICITY.
Hazardous Decomposition Products:CO AND CO2.
Disposal
Waste Disposal Methods:LIQUID MATERIAL IS DESIGNATED AS HAZARDOUS WASTE
UNTIL ALL SOLVENTS AND VAPORS HAVE EVAPORATED. DISPOSE OF I/A/W
LOCAL, STATE AND FEDERAL REGULATIONS. DRIED ADHESIVE MAY BE
DISPOSED OF AS ORDINARY WAS TE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.